ICAO Foam
FILMFOAM NF3C6 ICAO is a Aqueous Film Forming Foam (AFFF) Type 3 foam concentrate. It is a superior quality aqueous film forming foam which can be used at 3% concentration to extinguish fires of non-polar hydrocarbon fuels specially designed for fire of aviation gasoline (AVGAS) and aviation turbine fuel (ATF). FILMFOAM NF3C6 ICAO is suitable for use with most types of proportioning and discharge equipment.
FILMFOAM NF3C6 ICAO foam foam concentrate are designed for rapid fire knockdown by producing a thin aqueous film which helps to prevent the release of fuel vapour. The foam blanket from which the film forming liquid drains separates oxygen from the fuel surface, extinguishes the fire and prevents re-ignition.
The water content of the foam provides a cooling effect. The foam blanket from which the film forming liquid drains separates oxygen from the fuel surface, extinguishes the fire and prevents re-ignition.
The water content of the foam provides a cooling effect. FILMFOAM NF3C6 ICAO provides excellent penetrating and wetting qualities when used on Class A fires. This is important when extinguishing deep-seated fires.
- Reduction of surface tension helps its solution to penetrate easily and thus make it superior wetting and penetrating characteristics.
- As this agent used as additive with water so it increases water efficiency almost five times.
- Suitable for use with all siliconized dry chemical extinguishing agents.
- Packing shall be 20 litres, 200 litres or 1000 litres tote.
|
PRODUCT |
FILMFOAM NF3C6 ICAO |
|
Use Concentration |
3% |
|
Specific gravity @ 25°C |
1.03 ± 0.02 |
|
pH |
6.5 - 8.5 |
|
Viscosity |
< 5 cSt |
|
Storage temp |
-50C to 490C |
|
Drain Time* |
> 3 minutes |
|
Expansion * |
>8 |
*Drainage time values depend on the equipment & the application conditions
|
AFFF 3 FILMFOAM NF3 C6 ICAO TDS |
