Flourine Free Foam
ENVIROF3 FLOURINE FREE FOAM Synthetic Fluorine Free Foam Concentrate is a specially formulated, synthetic, firefighting foam concentrate. It contains no alkyl phenol ethoxylates or fluorine. As a result, it is 100% biodegradable and presents the lowest environmental impact of any Class B firefighting foam. It produces an exceptionally strong and cohesive foam blanket, aiding in rapid knockdown and extinguishment of hydrocarbon fires.
The strong foam blanket also protects extinguished fuel from re-ignition. It can also mitigate hazardous vapor of toxic materials. As this material possesses good penetration properties, it is very useful for extinguishing Class A deep-seated fires involving wood, paper, plastic, rubber, tires, etc."
ENVIROF3 FLOURINE FREE FOAM is intended for use at a proportioning rate of 3% (3 parts Fluorine Free F3 concentrate to 97 parts water) on Class B hydrocarbon type fuels such as gasoline, kerosene, diesel, etc.
ENVIRO-ARF3 FLOURINE FREE FOAM is intended for use on hydrocarbons fules such as gasoline, kerosene, diesel, etc. and polar solvent / water miscible fule such as alcohols, ketones, esters etc. at the same use concentration of 3x3%.
- Because of its superior environmental impact properties, this product is ideally suited for municipalities and fire departments. Excellent wetting characteristics when used in combating Class A fuel fires.
- Suitable for use with either fresh, brackish, or sea water
- Contains no fluorosurfactants or fluorine!
- Suitable for use with aspirating foam nozzles
- Suitable for use with certain deluge or closed head foam water sprinkler systems
- If inadvertently frozen, thawing will render
- Product completely serviceable again
- Suitable for use with carbon steel, fiberglass, polyethylene or stainless steel. AR-FFF is not compatible with galvanized pipe or fittings in an undiluted form
|
PRODUCT |
ENVIROF3 FLOURINE FREE FOAM |
ENVIRO-ARF3 FLOURINE FREE FOAM |
|
Use Concentration |
3% on hydrocarbon |
3% Hydrocarbon and/or Polar fuels |
|
SPECIFIC GRAVITY @ 25°C |
1.02 ± 0.2 |
1.02 ± 0.2 |
|
pH |
6.5 - 8.5 |
6.5 - 8.5 |
|
Viscosity |
< 50 cSt |
2500 ± 500 cSt |
|
Storage temp |
1.70C to 490C |
1.70C to 490C |
|
Drain Time* |
2 minutes 30 seconds |
5 minutes |
|
Expansion * |
>7 |
>7 |
*Drainage time values depend on the equipment & the application conditions
