Bulldozer - BDUSP2-2

The special fireman’s clothing- pattern BDUSP 2-2 is built of three layers- the outer layer, detachable thermo isolating lining, moisture barrier with an inner liner with diamond stitch. A complete BDUSP 2-2 outfit consists of a three quarter length jacket and trousers. It is marked with silver and yellow fluorescent bands and has signs reading “FIREMAN” (in the user’s language) made by thermo print method or attached with Velcro strips at the front and the back of the jacket. It also has Velcro strips for attaching distinctions and unit emblems. The jacket of special clothing covers the trousers to the length of minimum 30 cm. The sleeves of the special clothing jacket are sewn in such a way that it allows the user to lift their arms comfortably at an angle of more than 90° without visibly making the jacket rolled up. They have elasticized wrists at the inside of sleeves (fabric 95% meta aramid, 5% para aramid, with an opening for a finger) fastened to the thermo isolating inset, with adjustable Velcro cuffs, enabling the user to regulate the wrist. Stand-up, soft collar of jacket is protecting the throat with Velcro fastening (sealed with an additional strip of the external material). Strong zipper with two sections, zipping off in the lower part. External fastening with metal snaps or Velcro with additional Velcro strips between the snaps. In the lower part the jacket there are two square internal pockets with Velcro fastening, designed to be waterproof. In the upper part at the right side the jacket there is a breast inset pocket for adding communication Device (zipped towards the arm). Below the pocket and the warning band there are two strips with loops and a special Velcro loop for fastening the additional equipment (signaling device, gloves etc.) The outer layer of the jacket is made of 100% cotton (280 g/m2) noninflammable finish “PYROVATEX”. The inside layer of the jacket is a multi-stratum layer- steam- permeable fabric (membrane), and lining- and detached thermo isolating insert i.e. non-woven polyester fabric bipartitely coated with lining and quilted. The internal, external layers and moisture barrier of the jacket are stitched together. There is a double patch pocket in the lower part of the thermo isolating inset for personal dressing.